Analogue Haven
The Analogue Haven Menu who are the guys behind analogue haven? analogue haven on instagram analogue haven on vimeo what stuff does analogue haven sell? buy some used gear modular grid view your cart send an email to analogue haven 
back to main studio electronics page 

studio electronics

price : $209.00

from designer tim caswell’s own hand:

the amplifier (amp) is a 2 stage class a discrete design using 3 pairs of hand matched transistors. envelope is usually applied to st1/1. st1/2 goes thru an attenuverter and can be used for envelope or modulation. st2/1 goes to the 2nd stage, and is typically used for volume control. st2/2 goes thru an attenuverter and is typically used for modulation.

the amp, the 5089, and the 3003 are class a circuits. they draw more current from the +12 rail than from the -12 volt rail. if the system power supply is under-sized, hum or buzz may be heard. in that case, larger filter capacitors and/or a larger power transformer will be needed. the 4075 draws equally from both rails, and is more immune to hum. like our filters boomstar modular amps are hand-built entirely in the u. s. of a—just ask rachael herbison!

potentiometer potential
four attenuation pots control the input, stage 1/2, stage 2/2, and output, delivering smooth, detailed, and complex expression.

switch it up
uber useful continuous hypnotic drone for endless sustain/release and drive—the overdrive circuit from the boomstar desktop—for last stage energy, and bite.

patch it up
six patch points: input, st 1/1, st 1/2, st 2/1, st 2/2, output direct the deepest manipulation.

all controls and patch points
input – adjusts the audio input.
stage 1/2 – adjusts stage 1/2.
stage 2/2 – adjusts stage 2/2.
drone – sustains the last note received—“hold that train.”
drive – final output stage overdirve/saturation.
output – adjusts the audio output.
input – audio input.
st 1/1 – stage 1/1 input.
st 1/2 – stage 1/2 input.
st 2/1 – stage 2/1 input.
st 2/2 – stage 2/2 input.
output – audio output.

Analogue Haven