Analogue Haven
The Analogue Haven Menu who are the guys behind analogue haven? analogue haven on instagram analogue haven on vimeo what stuff does analogue haven sell? buy some used gear modular grid view your cart send an email to analogue haven 
back to main doepfer page 

a-110-2 basic vco

price : $155.00

A-110-2 Basic VCO

a-110-2 basic vco: vintage edition

price : $155.00

A-110-2 Basic VCO (Vintage Edition)

module a-110-2 is a low-cost voltage-controlled oscillator. it's a slightly reduced version of the standard vco a-110-1. compared to the a-110-1 the a-110-2 has no sine output and the (expensive) octave rotary switch is replaced by a 3-position toggle switch. in return the a-110-2 is equipped with an additional linear fm input and a soft sync input. a jumper is used to select the range of the tune control between about ½ octave and about 4 octaves. the width of the module is only 8 hp compared to the 10 hp of the a-110-1.

all other features are essentially the same as for the a-110-1.

explanation of the jumpers and trimming potentiometers:
jp2: cv connection to a-100 bus
jp3: range of tune control (installed = about 4 octaves, not installed = about 1/2 octave)
jp4: ac/dc coupling of the linear fm input (installed = dc coupling, not installed = ac coupling)
p5: 1v/oct scale
p6: frequency offset
p7: high-end trim
p8: adjustment +1 oct. range switch
p9: adjustment -1 oct. range switch
p10: temperature vco heater

this module has a maximum current draw of 50ma. it requires 8 te/hp worth of space to fit in a eurorack frame.

Analogue Haven